KME Convexing Guide Rod
Product Description
True radius, convex bevels are now possible with a guided system! Our new convexing guide rod screws right into any KME stone carrier.
The convexing rod is formed in a smooth uniform curve which results in approximately 5 degrees of angle change from the beginning of each stroke to the end.
This gradual, 5 degree angle change produces beautifully rounded bevels which were previously only possible by free-hand sharpening with sandpaper on a soft backer pad or with belt sanders.
Includes an adjustable stop to prevent the possibility of scratching your blades, and a knurled thumb nut for locking the rod in place in perfect position. See the full instructional video including how to set the convexing rod up on your stone carrier, and how it’s used to sharpen below:
The convexing rod is formed in a smooth uniform curve which results in approximately 5 degrees of angle change from the beginning of each stroke to the end.
This gradual, 5 degree angle change produces beautifully rounded bevels which were previously only possible by free-hand sharpening with sandpaper on a soft backer pad or with belt sanders.
Includes an adjustable stop to prevent the possibility of scratching your blades, and a knurled thumb nut for locking the rod in place in perfect position. See the full instructional video including how to set the convexing rod up on your stone carrier, and how it’s used to sharpen below:
